Dell OptiPlex 755 Administration Guide - Page 14
Set PRTC, Idle Timeout
View all Dell OptiPlex 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Set PRTC Enter PRTC in GMT (UTC) format (YYYY:MM:DD:HH:MM:SS). Valid date range is 1/1/2004 - 1/4/2021. Setting PRTC value is used for virtually maintaining PRTC during power off (G3) state. This configuration is only displayed for the Enterprise Provision Model. Idle Timeout Use this setting to define the ME WoL idle timeout. When this timer expires, the ME enters a low-power state. This timeout takes effect only when one of the ME WoL power policies is selected. Enter the value in minutes.
Set PRTC
Enter PRTC in GMT (UTC) format (YYYY:MM:DD:HH:MM:SS). Valid date range is 1/1/2004
–
1/4/2021. Setting PRTC value is used for virtually maintaining PRTC
during power off (G3) state. This configuration is only displayed for the Enterprise Provision Model.
Idle Timeout
Use this setting to define the ME WoL idle timeout. When this timer expires, the ME enters a low-power state. This timeout takes effect only when one of the
ME WoL power policies is selected. Enter the value in minutes.