Dell PowerEdge 2300 Installation and Troubleshooting Guide - Page 180
do not change - 400
View all Dell PowerEdge 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
CARDBIOS ISA_CLR PASSWD 333MHZ* 350MHZ* 400MHZ* 450MHZ* RSVD1* Reserved (do not change). (default) The ISA configuration settings are retained at system boot. The ISA configuration settings are cleared at next system boot. (If the ISA configuration settings become corrupted to the point where the system won't boot, install the jumper plug and boot the system. Remove the jumper before restoring the ISA configuration information.) (default) The password feature is enabled. The password feature is disabled. The microprocessor's internal speed is 333 MHz. The microprocessor's internal speed is 350 MHz. The microprocessor's internal speed is 400 MHz (when available). The microprocessor's internal speed is 450 MHz (when available). Reserved (do not change). RSVD2* Reserved (do not change). * Only one of these jumpers should have a jumper plug installed. jumpered unjumpered B-4 Dell PowerEdge 2300 Systems Installation and Troubleshooting Guide