Denon DVD-5910 Owners Manual - English - Page 16
Connecting to a Digital Recorder MD Recorder, DAT Deck, etc., Connecting to a Stereo Component
View all Denon DVD-5910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ENGLISH (5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.) ✽ Set the "AUDIO SETUP" default setting as shown below. (See pages 40 ~ 44.) • "DIGITAL OUTPUT" → "PCM" "LPCM (44.1kHz/48kHz)" → "ON" Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers. DVD-5910 ENGLISH B 8 9 Digital audio input connector (OPTICAL) Digital audio input connector (COAXIAL) Optical fiber cable (or) 75Ω/ohms pin-plug cable (commercially available) (commercially available) NOTE: • Digital audio signals cannot be output when playing Super Audio CDs. Use analog connections to record Super Audio CDs. (6) Connecting to a Stereo Component DVD-5910 Stereo component NOTE: • When connecting to a 2-channel audio stereo device using the "5.1ch AUDIO OUT", set "AUDIO CHANNEL" under "AUDIO SETUP" on the "SETUP" to "2CH (SRS OFF)" or "2CH (SRS ON)" (see pages 40, 41.). For multi-channel sources, the signals are down-mixed into two channels (analog). (Only the front left and right channels are output for sources for which down-mixing is prohibited.) 16