Denon DVD-5910 Owners Manual - English - Page 84
Check the settings of HDMI/DVI SELECT.
View all Denon DVD-5910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
ENGLISH ENGLISH Symptom An image is not projected with an HDMI/DVI connection. Picture and sound are interrupted with HDMI/DVI connections Remote control unit does not operate. Check • Check the HDMI/DVI connection.(Check the status of the HDMI/DVI indicators.) • Check whether the connected monitor equipment or other equipment supports HDCP. (The DVD-5910 will not output a video signal unless the connected equipment supports HDCP.) • Check the settings of "HDMI/DVI SELECT". • Check whether the output format of the DVD-5910 (HDMI/DVI FORMAT) matches the input format of the connected equipment. • Check whether the video output setting at "PURE DIRECT" is set to "VIDEO OUT : OFF" or "ALL OFF". • When the "HDMI/DVI FORMAT" setting is set to "AUTO", the picture or sound may be interrupted when cables are connected or disconnected or depending on the conditions of the connected device(s). • Check that the batteries are inserted in the proper "" directions. • The batteries are dead. Replace them with new batteries. • Point the remote control unit at the remote control sensor when operating it. • Operate the remote control unit within a distance of 7 meters from the remote control sensor. • Remove the obstacle between the remote control unit and remote control sensor. Page 23 19~21 56 19~21 50, 51 56 24 24 24 24 24 84