Edimax AR-7211A V2 Manual - Page 10
Configuration 2
View all Edimax AR-7211A V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Figure 1 - No telephone before the splitter Configuration 2 0 shows the correct connection when a telephone set is installed before the splitter. Figure 2 - Telephone set connected before the splitter Note: When Configuration 2 is used, the filter must be installed close to the telephone cable. Do not use the splitter to replace the filter. Installing a telephone directly before the splitter may lead to failure of connection between the device and the central office, or failure of Internet 10
10
Figure 1
–
No telephone before the splitter
Configuration 2
0
shows the correct connection when a telephone set is installed before the
splitter.
Figure 2
- Telephone set connected before the splitter
Note:
When
Configuration 2
is used, the filter must be installed close to the
telephone cable. Do not use the splitter to replace the filter.
Installing a telephone directly before the splitter may lead to failure of
connection between the device and the central office, or failure of Internet