Edimax AR-7211A V2 Manual - Page 48
DHCP Static IP, Field, Description, DHCP Static IP Table, Network, ATM Settings, ADSL
View all Edimax AR-7211A V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
5.4.1.3. DHCP Static IP If you select DHCP Static IP in the left pane, you will see the following page. Here you can assign the IP addresses on the LAN to the specific individual PCs based on their MAC address. Field IP Address Mac Address Add Delete Selected Reset DHCP Static IP Table Description Enter the specified IP address in the IP pool range, which is assigned to the host. Enter the MAC address of a host on the LAN. After entering the IP address and MAC address, click "Add" to add a row to the DHCP Static IP Table. Select a row in the DHCP Static IP Table, then click "Delete Selected" to delete this row. Resets the fields in this page. Shows the assigned IP address based on the MAC address. 5.4.2. WAN Choose Network > WAN. The WAN page that is displayed contains WAN, Auto PVC, ATM Settings and ADSL Settings. 5.4.2.1. WAN Click WAN in the left pane, the page shown in the following figure appears. Here you can configure the WAN interface of your router. 48