Edimax AR-7211A V2 Manual - Page 45
Field, Description, DHCP Server, Active DHCP Client Table, Device IP Range Table, Show Client, DHCP
View all Edimax AR-7211A V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Field DHCP Mode IP Pool Range Show Client Default Gateway Max Lease Time Domain Name DNS Servers Set VendorClass IP Range Description If set to DHCP Server, the router can assign IP addresses, IP default gateway and DNS Servers to the host in Windows95, Windows NT and other operation systems that support the DHCP client. This specifies the first and the last IP address in the IP address pool. The router assigns an IP address that is in the IP pool range to the host. Click here to display the Active DHCP Client Table which shows IP addresses assigned to clients. Enter the default gateway of the IP address pool. The lease time determines the period that the host retains the assigned IP addresses before the IP addresses change. Enter the domain name if you know it. If you leave this blank, the domain name obtained by DHCP from the ISP is used. You must enter a host name (system name) on each individual PC. The domain name can be assigned from the router through the DHCP server. You can configure the DNS server IP addresses for DNS Relay. Click here to display the Device IP Range Table. You can configure the IP address range based on the device type. Click Show Client in the DHCP Mode page to display the Active DHCP Client Table which shows IP addresses assigned to clients, as shown below: 45