Edimax AR-7211A V2 Manual - Page 71
Field, Description, Interface, IP Address, 6.2.3., NAT Forwarding, Local IP Address, Remote IP
View all Edimax AR-7211A V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Field Protocol WAN Setting WAN Interface WAN Port LAN Open Port LAN IP Address Description Choose the transport layer protocol that the service type uses. You can choose TCP or UDP. You can choose Interface or IP Address. Choose the WAN interface that will apply to the virtual server. Choose the access port on the WAN. Enter the port number of the specified service type. Enter the IP address of the virtual server. It is in the same network segment with LAN IP address of the router. 5.6.2.3. NAT Forwarding Click NAT Forwarding in the left pane, and the page shown in the following figure will appear. Under 1483MER or 1483Routed mode, if NAPT (Network Address Port Translation) is enabled, the Local IP Address is configured as 192.168.1.3 and the Remote IP Address is configured as 202.32.0.2 - the PC with the LAN IP192.168.1.3 will use 202.32.0.2 when it is connected to the Internet via the router without NAPT control. 71