Edimax ER-1088 Available from Edimax USA Manual - Page 10

Some Status and Error conditions are indicated by the combinations of, LEDs, as shown below

Get Edimax ER-1088 Available from Edimax USA PDF manuals and user guides View all Edimax ER-1088 Available from Edimax USA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Ethernet Ports and Reset Button Ethernet Ports WAN ports: 2 to 8 WAN ports (default is 2), using Port 1 to Port 8 for connecting to Modem(s). LAN ports: The remaining ports which are connected to PCs or a Hub. Note: Any port will automatically operate as an "Uplink" port if required. You can use a normal LAN cable to connect to a normal port on another hub. Reset Button When pressed and released, the Multi-WAN VPN Link Balancer will reboot (restart) within 1 second. It will reset to default when pushed and held for more than 3 seconds. Some Status and Error conditions are indicated by the combinations of LEDs, as shown below: LED Action Status - System & Packets flash alternatively. Status - System & Packets flash concurrently. Status - System (Solid Off) & Packets (Solid On) Status - System (Solid On) & Packets (Solid On) Condition Firmware Download in progress. MAC address not assigned. SDRAM error Timer/Interrupt error Page 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Ethernet Ports and Reset Button
Ethernet Ports
WAN ports: 2 to 8 WAN ports (default is 2), using Port 1 to Port 8 for connecting
to Modem(s).
LAN ports: The remaining ports which are connected to PCs or a Hub.
Note:
Any port will automatically operate as an “Uplink” port if required. You can use a
normal LAN cable to connect to a normal port on another hub.
Reset Button
When pressed and released, the Multi-WAN VPN Link Balancer will reboot
(restart) within 1 second. It will reset to default when pushed and held for more
than 3 seconds.
Some Status and Error conditions are indicated by the combinations of
LEDs, as shown below:
LED Action
Condition
Status – System & Packets flash alternatively.
Firmware Download in progress.
Status – System & Packets flash concurrently.
MAC address not assigned.
Status – System (Solid Off) & Packets (Solid On)
SDRAM error
Status – System (Solid On) & Packets (Solid On)
Timer/Interrupt error
Page 6