Edimax ER-1088 Available from Edimax USA Manual - Page 18
Configuring the Multi-WAN VPN Link Balancer for Internet Access
View all Edimax ER-1088 Available from Edimax USA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
• For each PC connected to the LAN ports, the corresponding LAN LED (either 10/Yellow or 100/Green) should be ON. 3. Configuring the Multi-WAN VPN Link Balancer for Internet Access To configure access to the Internet, first decide how many WAN ports you are going to use. The pull down menu on the MAX WAN web page (Figure 2-5) will let you setup the WAN port numbers. You can choose from two (2), up to eight (8) WAN ports. Once you have selected how many ports you are going to use, click on Submit. You may then proceed to the Primary Setup page. Figure 2-5: MAX WAN Select Primary Setup from the menu. You will see a screen like in the example below. • Configure each WAN one by one through the Interface column pull-down menu. • For any of the following situations, refer to Chapter 3: Advanced Port Setup, for any further configuration which may be required: • Using multiple WAN ports • Enabling multiple IP addresses on each WAN port • Enabling multiple PPPoE sessions • PPTP connection method Page 14