Edimax ER-1088 Available from Edimax USA Manual - Page 85
Data - System Status
View all Edimax ER-1088 Available from Edimax USA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Data - System Status WAN Interface LAN Interface Device Information • Connection Type - The type of connection used - DHCP, Fixed IP, PPPoE or PPTP. • Connection Status - Either "Connected" or "Disconnected". • "Force Renew" button- Only available if using a dynamic IP address (DHCP). Clicking this button will perform a DHCP "Renew" transaction with the ISP's DHCP server. This will extend the period for which the current WAN IP address is allocated to you. • Connect/Disconnect - Used for dial-up/connection of PPPoE or PPTP. • IP Address - The IP address of the Multi-WAN VPN Link Balancer, as seen from the Internet. This IP Address is allocated by the ISP (Internet Service Provider). • Subnet Mask - The Network Mask (Subnet Mask) for the IP Address above. • Domain Name IP Address - The address of the current DNS (Domain Name Server) • Gateway - The address of the Multi-WAN VPN Link Balancer gateway. • MAC Address - The MAC (physical) address of the Multi-WAN VPN Link Balancer, as seen from the Internet. • IP Address - The LAN IP Address of the Multi-WAN VPN Link Balancer. • Subnet Mask - The Network Mask (Subnet Mask) for the IP Address above. • MAC Address - The MAC (physical) address of the Multi-WAN VPN Link Balancer, as seen from the local LAN. • DHCP Server - The status of the DHCP Server function - either "Enabled" or "Disabled". • Hardware ID - The manufacturers ID for this particular device. • Firmware Version - Version of the Firmware currently installed. • NAT - Status of the NAT feature - either "Enable" or "Disable". • Load Balance - Status of the Load Balance feature - either "Enable" or "Disable". • Virtual Server - Status of the Virtual Server feature - either "Enabled" or "Disabled". • Special Applications - Status of the Special Applications feature - either "Enabled" or "Disabled". • Multi DMZ - Status of the Multi DMZ feature - either "Enabled" or "Disabled". • Block URL - Status of the Block URL feature - either "Enable" or "Disable". Page 81