Edimax ER-1088 Available from Edimax USA Manual - Page 20

Address, Information, PPPoE / PPTP, Dialup, PPPoE Host name, Optional, Host name, Domain name, MAC

Get Edimax ER-1088 Available from Edimax USA PDF manuals and user guides View all Edimax ER-1088 Available from Edimax USA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Address Information PPPoE / PPTP Dialup DNS Optional This is for Static IP users only. Enter the address information (IP Address, Subnet Mask, Gateway) provided by your ISP. If your ISP provides multiple IP address, you can use the Multi-DMZ screen to assign any additional IP addresses. This is for PPPoE or PPTP users only. • Enter the Username and Password provided by your ISP. • If using PPTP, enable the PPTP Connection checkbox and enter the IP address of the PPTP server. • PPPoE Host name (Optional) - This field is used by a Host to uniquely associate an access concentrator with a particular Host request. Note: There are additional PPPoE/PPTP options on the Port Options screen. To use multiple PPPoE sessions on either port, configure settings in the Advanced PPPoE screen. If using a Fixed IP address, you MUST enter at least 1 DNS address. If using a Dynamic IP, PPPoE or PPTP; DNS information is optional. • Host name - This is required by some ISPs. If your ISP provided a Host Name, enter it here. Otherwise, you can use the default value. • Domain name - This is required by some ISPs. If your ISP provided a Domain Name, enter it here. Otherwise, you can use the default value. • MAC address - Some ISP records your MAC address (also called "Physical address" or "Network Adapter address"). If so, you can enter the MAC address expected by your ISP in this field. Otherwise, this should be left at the default value. Setup of the Multi-WAN VPN Link Balancer is now complete. PCs on your LAN must now be configured. See the following section for details. Page 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Address
Information
This is for
Static IP
users only. Enter the address information (IP Address,
Subnet Mask, Gateway) provided by your ISP. If your ISP provides multiple IP
address, you can use the
Multi-DMZ
screen to assign any additional IP
addresses.
PPPoE / PPTP
Dialup
This is for
PPPoE
or
PPTP
users only.
•
Enter the
Username
and
Password
provided by your ISP.
•
If using PPTP, enable the
PPTP Connection
checkbox and enter the IP
address of the PPTP server.
•
PPPoE Host name
(Optional) – This field is used by a Host to uniquely
associate an access concentrator with a particular Host request.
Note:
There are additional PPPoE/PPTP options on the
Port Options
screen.
To use multiple PPPoE sessions on either port, configure settings in the
Advanced PPPoE
screen.
DNS
If using a
Fixed IP
address, you MUST enter at least 1 DNS address.
If using a
Dynamic IP
,
PPPoE or PPTP
; DNS information is optional.
Optional
•
Host name
– This is required by some ISPs. If your ISP provided a Host
Name, enter it here. Otherwise, you can use the default value.
•
Domain name
– This is required by some ISPs. If your ISP provided a
Domain Name, enter it here. Otherwise, you can use the default value.
•
MAC address
– Some ISP records your MAC address (also called "Physical
address" or "Network Adapter address"). If so, you can enter the MAC
address expected by your ISP in this field. Otherwise, this should be left at
the default value.
Setup of the Multi-WAN VPN Link Balancer is now complete. PCs on your LAN must now be
configured. See the following section for details.
Page 16