Edimax ER-1088 Available from Edimax USA Manual - Page 11
Rear Panel
View all Edimax ER-1088 Available from Edimax USA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Rear Panel Figure 1-3: Rear Panel AC 100V ~ 240V Connects to AC100~240V / 50~60Hz with supplied AC power cord. Default Settings When the Multi-WAN VPN Link Balancer has finished booting, all configuration settings will be set to the factory defaults, including: • IP Address set to its default value of 192.168.1.1, with a Network Mask of 255.255.255.0 • DHCP Server is enabled • User Name: admin • Password cleared (no password) TFTP Download This setting should be used only if your Multi-WAN VPN Link Balancer becomes unusable and you are attempting to restore it by upgrading the firmware. Follow this procedure: 1. Power-On the Multi-WAN VPN Link Balancer. 2. Use the supplied Windows utility or a TFTP client program to apply the new firmware. If using the supplied Windows TFTP program, the screen will look like the following example: Figure 1-4: Windows TFTP utility • Enter the name of the firmware upgrade file located on your PC, or click the "Browse" button to locate the file. • Enter the LAN IP address of the Multi-WAN VPN Link Balancer in the "Server IP" field. • Click "Upgrade Firmware" to send the file to the Multi-WAN VPN Link Balancer. 3. When the upgrade is finished, the Multi-WAN VPN Link Balancer should work normally. The factory default settings will be applied. Page 7