Edimax ER-1088 Available from Edimax USA Manual - Page 29
Advanced PPTP
View all Edimax ER-1088 Available from Edimax USA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Options PPPoE Auto Dialup Connection Status • Specified Fix IP Address - If you have a fixed IP address, enter if here. Otherwise, this field should be left at 0.0.0.0. • Assigned Host Name -This field is used by a Host to uniquely associate an access concentrator with a particular Host request. • Auto Dialup (connect-on-demand) - If set to Enable, a connection will be established whenever outgoing WAN traffic is detected. If not enabled, you must establish a connection manually. • Disconnect after Idle - This determines when an idle connection will be terminated. Enter the required time period. (-1: Always on) • Echo Time - This determines how often an Echo request is sent to the PPPoE server. The Echo request is used to determine if the connection is still alive. Normally, there is no need to change the default value. • Echo Retry - The number of times the Echo request will be sent, if there is no response to the first request. Normally, there is no need to change the default value. This displays the current connection status for each session. Advanced PPTP This Advanced PPTP screen is only useful if using the PPTP connection method. Figure 3-4: Advanced PPTP Page 25