Edimax ER-1088 Available from Edimax USA Manual - Page 47
NAT Setup
View all Edimax ER-1088 Available from Edimax USA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
NAT Setup NAT (Network Address Translation) is the technology which allows one (1) WAN (Internet) IP address to be used by multiple LAN users. Figure 4-10: NAT Setup Settings - NAT Setup NAT Configuration • NAT Routing - You can enable or disable NAT through the check box. If you disable the NAT checkbox, it will act as a bridge or Static Router. Most features will be unavailable. • TCP Timeout - Enter the desired value to use on each WAN port. The default is 300 • UDP Timeout - Enter the desired value to use on each WAN port. The default is 120 • TCP Window Limit - Enter the desired value to use on each WAN port. The default is 0 (no limit). • TCP MSS Limit - Enter the required MSS (Maximum Segment Size) to use on each WAN port. The default is 0 (no limit). Page 43