Edimax ER-1088 Available from Edimax USA Manual - Page 38
Settings - Virtual Server
View all Edimax ER-1088 Available from Edimax USA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
http://my_domain_name.dyndns.org ftp://my_domain_name.dyndns.org This screen allows you to define your own Server types. Figure 4-5: Virtual Server Settings - Virtual Server Virtual Server Configuration • Enable - The enable checkbox is to Enable or Disable each Virtual server as required. • Server Name - Enter a suitable name for this server. (By default, 12 well-known virtual servers have been listed on the Custom Virtual Server List) • Protocol - Select the network protocol (TCP/UDP) used by this sever. • IP Address - LAN, Enter the IP address of the server on your LAN which is running the required Server software. Each Host (server) should have a fixed IP address, or have a reserved IP address. (See the Host IP section earlier in this Chapter for details on reserving an IP address.) Each Host (server) must be running the appropriate Server software WAN - This selection allows this server to bind to any WAN port (1-8), Page 34