Edimax ER-1088 Available from Edimax USA Manual - Page 30
Settings - Advanced PPTP
View all Edimax ER-1088 Available from Edimax USA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Settings - Advanced PPTP WAN Port Select the desired WAN port (click desired WAN on Connection Status). The data of the selected port will then be displayed in the WAN IP Account section. PPTP MTU - Maximum transfer unit for PPTP. The default value is 1460 WAN IP Account • User Name - The PPTP user name (login name) assigned by your ISP. • Password - The PPTP password associated with the User Name above. This is assigned by your ISP, and used to login to the PPTP Server. • Verify Password - Re-enter the PPTP password assigned by your ISP. • Server IP Address - Enter the IP address of the PPTP Server, as provided by your ISP. • Static IP Address - If you have a fixed IP address, enter if here. Otherwise, this field should be left at 0.0.0.0. PPTP Auto Dialup • Auto Dialup (connect-on-demand) - If set to Enable, a connection will be established whenever outgoing WAN traffic is detected. If not enabled, you must establish a connection manually. • Disconnect after Idle - This determines when an idle connection will be terminated. Enter the required time period. (-1: Always on) • Echo Time - This determines how often an Echo request is sent to the PPTP server. The Echo request is used to determine if the connection is still alive. Normally, there is no need to change the default value. • Echo Retry - The number of times the Echo request will be sent, if there is no response to the first request. Normally, there is no need to change the default value. Connection Status This displays the current PPTP connection status. Page 26