Edimax ER-1088 Available from Edimax USA Manual - Page 15
Lan & Dhcp
View all Edimax ER-1088 Available from Edimax USA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
9. Select LAN & DHCP from the menu. You will see a screen like in the example below. Figure 2-3: LAN & DHCP Setup 10. If your LAN already has a DHCP Server and you wish to continue using it, the following configuration is required: • The DHCP Server function in the Multi-WAN VPN Link Balancer must be disabled. You will find this setting in the LAN & DHCP screen. • Your DHCP Server must be configured to provide the Multi-WAN VPN Link Balancer's LAN IP Address as the "Default Gateway". • Your DHCP Server must provide correct DNS addresses to any connected PCs. 11. Ensure these settings are suitable for your LAN: • See the following table for details of each setting. For most situations, the default settings will be suitable. Page 11
Select
LAN & DHCP
from the menu. You will see a screen like in the example below.
9.
Figure 2-3: LAN & DHCP Setup
10.
11.
If your LAN already has a DHCP Server and you wish to continue using it, the following
configuration is required:
•
The DHCP Server function in the Multi-WAN VPN Link Balancer must be
disabled
. You will
find this setting in the
LAN & DHCP
screen.
•
Your DHCP Server must be configured to provide the Multi-WAN VPN Link Balancer's LAN IP
Address as the "Default Gateway".
•
Your DHCP Server must provide correct DNS addresses to any connected PCs.
Ensure these settings are suitable for your LAN:
•
See the following table for details of each setting.
For most situations, the default settings will
be suitable.
Page 11