Epson 570e User Manual - Page 129
Software, slash, High speed draft, I/F interface mode, ESC/P2, IBM 2390 Plus, Parallel, Optional
UPC - 010343813854
View all Epson 570e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
When set to Auto, the printer analyzes the data and uses unidirectional printing for any lines which require vertical printing alignment. Software When you select ESC/P2, the printer operates in the EPSON ESC/ P2 mode. When you select IBM 2390 Plus, the printer emulates an IBM printer. 0 slash The zero character has a slash (0) when this feature is on. It has no slash (0) when this feature is off. The slash allows you to easily distinguish between the uppercase letter "O" and a zero. 5 High speed draft When you choose On, the printer prints up to 400 cps (characters per second) at 10 cpi (characters per inch). When you choose Off, the printer prints up to 300 cps at 10 cpi. I/F (interface) mode The printer comes with a built-in parallel interface and an interface slot in which you can install one optional interface. For information on using an optional interface, see "Optional interface cards" on page A-4. If your printer is connected to only one computer, select Parallel or Optional for the interface mode, depending on the interface you use. If your printer is connected to two computers, select Auto (automatic) to allow the printer to automatically switch between interfaces depending on which one is receiving data. Changing Printer Settings From the Printer's Control Panel 5-7