Epson 570e User Manual - Page 152
The printer prints strange symbols, incorrect fonts, or other, inappropriate characters.
UPC - 010343813854
View all Epson 570e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
The skip over perforation setting is on. Turn off the skip over perforation setting in the default-setting mode or the EPSON Remote! utility. See "About Your Printer's Default Settings" on page 5-4 or "Using the EPSON Remote! Utility" on page 4-30. The printer prints strange symbols, incorrect fonts, or other inappropriate characters. Cause What to do Your printer and computer are not communicating correctly. Make sure that you are using the correct interface cable and that the communications protocol is correct. See "Optional interface cards" on page A-4 and your computer documentation. If you installed an optional serial interface card, also see "Installing an Interface Card" on page A-29. The wrong character table is selected in your software. Select the correct character table using your software, the default-setting mode, or the EPSON Remote! utility. The character table setting in your software overrides settings made in the default-setting mode or the EPSON Remote! utility. The printer you want to use is Choose the correct printer from the not selected in your software. Windows desktop or in your application before printing. Your application software is not configured correctly for your printer. Make sure that your application software is set up correctly for your printer. See your application documentation. If necessary, install or reinstall the printer driver software as described in Chapter 1. 7-14 Troubleshooting