Epson 570e User Manual - Page 83

❏ Before printing, set the paper thickness lever (located under the printer cover) to the proper position for your paper. See the table on page 3-3, for details. ❏ Be sure your multipart forms do not exceed 0.39 mm (0.015 inch) in thickness. Loading envelopes 3 You can load envelopes in the top paper slot only, as described in "Loading Single Sheets in the Top Paper Slot" on page 3-8. Also follow these guidelines: ❏ Load envelopes one at a time in the top slot, with the flap fold first and the flap side up. flap side up, printable side down ❏ Set the paper thickness lever (located under the printer cover) to position 2 or 6 to match the thickness of the envelope. ❏ Do not use envelopes that are curled or folded. Also avoid using envelopes that are too thin; they may curl during printing and become jammed. ❏ If you are using No. 6 envelopes, align the left edge of the envelope with the arrow mark on the printer. Printing on Single Sheets 3-5