Epson 570e User Manual - Page 9

Control Panel Buttons and Lights Font button Selects the font. See Chapter 5. Font lights Indicate which font is selected. Condensed button Turns on and off the condensed mode. Condensed light Lights up when the condensed mode is on. LF/FF button q Feeds paper line by line when pressing shortly. q Ejects a single sheet or advances continuous paper to the next top-of-form position when held down. Paper Out light q On when no paper is loaded in the selected paper source or paper is not loaded correctly. q Flashes when paper has not been fully ejected or a paper jam has occurred. Tear Off/Bin button Load/Eject button Pause button q Advances continuous paper to the q Loads a single sheet of Stops printing temporarily, tear-off position. paper. and resumes printing q Feeds continuous paper backward q Ejects a single sheet of when pressed again. from the tear-off position to the top- paper if a sheet is When pressed for three of-form position. loaded. seconds, turns on the q Selects a cut-sheet feeder bin when q Loads continuous paper *micro adjust mode. To the cut-sheet feeder is installed. from the standby turn off, press again. q Turns on the card mode to print on postcards and envelopes. See Chapter 3. position. q Feeds continuous paper backward to the standby position. Pause light q On when the printer is paused. Tear Off/Bin lights q Flashes when the q f f when continuous paper is in the printer is in the *micro tear-off position. adjust mode. q o n when bin 1 of the optional cut- q Flashes when the print sheet feeder is selected. head has overheated. q n o when bin 2 of the optional cut- sheet feeder is selected. q n n when the printer is in the card mode. *Micro Adjust mode When you hold down the Pause button for three seconds, the printer enters the micro adjust mode. In n = On this mode, you can press the LF/FFD and Load/EjectU f = Flashing buttons to adjust the top-of-form or tear-off position. o = Off See Chapter 2.