Epson 570e User Manual - Page 141

State of panel lights Beep pattern Problem Solution f Paper Out n Pause ••• Continuous paper is not fed to the standby position. Tear off the printed document at the perforation; then press the Load/Eject button. The printer feeds the paper to the standby position. Press the Pause button to turn off the Pause light. ••• A single sheet of paper is not fully ejected. Press the Load/Eject button to eject the sheet. Then press the Pause button to turn off the Pause light, if necessary. ••• Paper is jammed in the printer. Clear the paper jam as described on "Clearing Paper Jams" on page 7-16. f Pause - The print head is overheated. f Paper Out f Pause f f Tear Off/Bin f f f Font Wait a few minutes; the printer resumes printing automatically once the print head cools. 7 An unknown printer error has occurred. Turn off the printer and leave it off for several minutes; then turn on the printer again. If the error recurs, contact your dealer. n = on, f = flashing short series of beeps (three beeps long series of beeps (five beeps) Note: The printer beeps once if you press a control panel button when the corresponding function is not available. Troubleshooting 7-3