Epson 570e User Manual - Page 200
Continuous paper, standard and multipart: front, rear, and bottom entry
UPC - 010343813854
View all Epson 570e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Thickness Weight 0.22 mm (0.0087 inch) 192 g/m² (51 lb) Continuous paper (standard and multipart): front, rear, and bottom entry Width 101.6 to 254 mm (4.0 to 10.0 inches) Length (one page) 101.6 to 558.8 mm (4.0 to 22.0 inches) Copies 1 original + up to 4 copies Thickness Printable area 0.065 to 0.39 mm (0.0025 to 0.015 inch) Perforated edges up to 0.9 mm (0.035 inch) Weight (not multipart) 52 to 82 g/m² (14 to 22 lb) Weight 40 to 58 g/m² (12 to 15 lb) (one sheet of multipart) Binding Point glue or paper staples on both sides (front, bottom, or rear entry) ❏ The continuous multipart forms should be securely joined together along the left and right edges by crimping. Crimping should be pressed in from the original sheet side and go completely through all copy sheets. ❏ The ratio of the cut/uncut length at the perforation should be between 3:1 and 5:1. ❏ The perforation between pages should not extend all the way to the edges of the paper. ❏ At the perforation between pages, the horizontal and vertical perforation cuts should not cross. ❏ The thickness of the perforation part when extended should be 1 mm or less. C-8 Specifications