Epson Apex 386/33 Canadian Product User Manual - Page 124
Cables for Disk Drives, Removal, To remove a drive
View all Epson Apex 386/33 Canadian Product manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
One edge of the ribbon cable is marked with a color line. This specific line side of the connector should be at pin 1 when attached to the card. Pin 1 is clearly marked on the card. See the figure below: Figure 6-5: Cables for Disk Drives Follow the same procedure for any additional drives you want to install. Removal To remove a drive, just reverse the procedure described above. Disconnect the cables, undo the screws and slide the drive out. Chapter 6: Appendix 5
One edge of the ribbon cable is marked with a color line.
This specific line side of the connector should be at pin 1
when attached to the card. Pin 1 is clearly marked on the
card. See the figure below:
Figure 6-5: Cables for Disk Drives
Follow the same procedure for any additional drives you want to install.
Removal
To remove a drive, just reverse the procedure described above. Dis-
connect the cables, undo the screws and slide the drive out.
Chapter 6: Appendix
5