Epson Apex 386/33 Canadian Product User Manual - Page 88
Initial Screen, When the RAM test is completed, the SETUP program will take over.
View all Epson Apex 386/33 Canadian Product manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
If you reconfigure your system, you will need to enter the setup program. When you restart the system, press the key quickly just after the RAM test. If you miss the chance to do so, press the hardware reset switch, or just press the software reset switch , and simultaneously to enter the setup program. Before the setup program appears, the following message will be shown on the screen: SETUP utility will be starting When the RAM test is completed, the SETUP program will take over. Once you have entered the SETUP program, you will see the following initial screen: ROM SETUP PROGRAM VERSION 1.02 (C) COPYRIGHT DATATECH ENTERPRISES CO., LTD 1988. 1. SET UP SYSTEM CONFIGURATION. 2. PREFORMAT HARD DISK. 3. SET UP BUILT-IN UTILITY. 4. SET UP PASSWORD. 5. SET UP USER-DEFINED HARD DISK TYPE. 9. QUIT SETUP PROGRAM. CHOOSE ITEM NUMBER : [ ] Figure 3-1: Initial Screen 4 Chapter 3: Operating Your System