Epson Apex 386/33 Canadian Product User Manual - Page 44
Swith Setting
View all Epson Apex 386/33 Canadian Product manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Switch Settings The location of the six-switch DIP SW1 can be seen below. Each switch has an ON and OFF position (usually the ON position is labeled, the OFF position is not). SW1 should be set appropriately, based on the following description. Figure 2-4: The Six-Switch DIP SW1 Table 2-1: Total 32-Bit Memory Note: Total 32-bit memory means onboard 32-bit memory plus that on the PEI-306 32-bit extended memory card. Chapter 2: Setting Up Your System 5
Switch Settings
The location of the six-switch DIP SW1 can be seen below. Each
switch has an ON and OFF position (usually the ON position is labeled,
the OFF position is not). SW1 should be set appropriately, based on
the following description.
Figure 2-4:
The Six-Switch DIP SW1
Table 2-1:
Total 32-Bit Memory
Note:
Total 32-bit memory means onboard 32-bit memory plus that on
the PEI-306 32-bit extended memory card.
Chapter 2: Setting Up Your System
5