Epson Apex 386/33 Canadian Product User Manual - Page 46
Video Selection
View all Epson Apex 386/33 Canadian Product manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
This is caused by different methods of testing memory among BIOSes. The solution is to set the switches for the total 32-bit memory in accordance with the physical DRAM installed. Most of the BlOSes do not have this problem. If you want to add a 16-bit extension memory card to the PEM-3301 mainboard, total 32-bit memory must match with the switch setting for total onboard 32-bit memory plus that on the PEI-306 32-bit extension memory card. For example, if the switch setting for total 32-bit memory is 6MB, you'll need 6MB (on the PEI-306 card and onboard together in some combination) of actual system memory before you can add a 16-bit extension memory card. Otherwise, there will be an address conflict for the memory. Video Selection The switch SW1-6 is used to select color or monochrome display modes. Refer to the figure below for the jumper settings. Table 2-3: SW1-6 Switch Settings Chapter 2: Setting Up Your System 7