Epson Apex 386/33 Canadian Product User Manual - Page 81
Connection to Power Supply, Connecting to a Power Supply
View all Epson Apex 386/33 Canadian Product manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
2-4 Connection to Power Supply If your power supply has not been attached to your motherboard, you may need to attach the power supply cable to the mainboard at the connector beside the power on the motherboard. In this case, you should connect cables on the power supply to 2 six-pin connectors. You may also need to attach the four-pin connectors for disk drives. Be sure the four black wires of the power supply cables are located in the middle of the power connectors. Refer to the figure below. Pin 1 is numbered in the picture for your convenience. Figure 2-38: Connecting to a Power Supply 42 Chapter 2: Setting Up Your System
2-4 Connection to Power Supply
If your power supply has not been attached to your motherboard, you
may need to attach the power supply cable to the mainboard at the
connector beside the power on the motherboard. In this case, you
should connect cables on the power supply to 2 six-pin connectors.
You may also need to attach the four-pin connectors for disk drives.
Be sure the four black wires of the power supply cables are located in
the middle of the power connectors. Refer to the figure below. Pin 1 is
numbered in the picture for your convenience.
Figure 2-38: Connecting to a Power Supply
42
Chapter 2: Setting Up Your System