Epson Apex 386/33 Canadian Product User Manual - Page 65
Table 2-9, Onboard 32-Bit Memory, board and 4MB on the PEI-306, the switch setting for total
View all Epson Apex 386/33 Canadian Product manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Table 2-9: Onboard 32-Bit Memory Note: The switch setting for onboard 32-bit memory must match the physical memory installed onboard. The switch setting of the PEI-306 must correspond to the physical memory installed on the card. If you don't have a 16-bit memory extension card in your system, the switch setting for total 32-bit memory must be for an amount larger than or equal to total installed memory (including onboard 32-bit memory and 32-bit memory on the PEI-306). For example, if the total memory installed is 8MB (4MB onboard and 4MB on the PEI-306), the switch setting for total 32-bit memory could be 8MB, 12MB or 16MB. But if you use some other BIOS with the switch settings (SW1 -1, SW1 -2, SW1 -3) for total 32-bit memory larger than the physical DRAM installed, there will be an error message. 26 Chapter 2: Setting Up Your System