Epson C11C294131BZ User Manual - Page 30
Using the serial interface, Tighten the screws on either side of the connector.
View all Epson C11C294131BZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Using the serial interface 1. Turn off both the computer and the printer. Plug the serial cable connector securely into the printer's serial interface. Tighten the screws on either side of the connector. Note: If there is a ground wire at the end of the cable, attach it to the ground connector to the right of the interface. Setting Up the Printer 1-15
Using the serial interface
1.
Turn off both the computer and the printer. Plug the serial
cable connector securely into the printer’s serial interface.
Tighten the screws on either side of the connector.
Note:
If there is a ground wire at the end of the cable, attach it to the
ground connector to the right of the interface.
Setting Up the Printer
1-15