Epson C11C294131BZ User Manual - Page 57

Installing and Using Options, Cut-sheet feeder

Get Epson C11C294131BZ - LX 300+ B/W Dot-matrix Printer PDF manuals and user guides View all Epson C11C294131BZ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Tractor When you use the tractor as a pull or push tractor, leave this option set to Single. If you install an optional tractor and use both tractors as a push-pull tractor, set it to Double. Interface When this feature is set to Auto, the printer determines which interface is receiving data and switches to that interface until the end of the print job (when no data is received from the selected interface for the amount of time specified). You can specify either 10 seconds or 30 seconds. Set this option to Parallel only if you want the printer to ignore data from the serial interface or to Serial only if you want the printer to ignore data from the parallel interface. Bit rate, parity bit, data length, and ETX/ACK These options are available only when the interface is set to Serial. See your computer manual for the appropriate settings. Installing and Using Options Cut-sheet feeder The optional single-bin cut sheet feeder (C80637V) handles up to 50 sheets of standard bond paper ( 82 g/m2 or 22 lb) without reloading. Follow these steps to install the cut sheet feeder: 1. Make sure the printer is turned off. Remove the paper guide. 2. If the tractor is installed in the pull-tractor position, remove it and re-install it in the push-tractor position. 3. Make sure the paper-release lever is in the single-sheet position. 2-24 Using the Printer

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Tractor
When you use the tractor as a pull or push tractor, leave this
option set to Single. If you install an optional tractor and use both
tractors as a push-pull tractor, set it to Double.
Interface
When this feature is set to Auto, the printer determines which
interface is receiving data and switches to that interface until the
end of the print job (when no data is received from the selected
interface for the amount of time specified). You can specify either
10 seconds or 30 seconds.
Set this option to Parallel only if you want the printer to ignore
data from the serial interface or to Serial only if you want the
printer to ignore data from the parallel interface.
Bit rate, parity bit, data length, and ETX/ACK
These options are available only when the interface is set to Serial.
See your computer manual for the appropriate settings.
Installing and Using Options
Cut-sheet feeder
The optional single-bin cut sheet feeder (C80637
) handles up to
50 sheets of standard bond paper ( 82 g/m
2
or 22 lb) without
reloading. Follow these steps to install the cut sheet feeder:
1.
Make sure the printer is turned off. Remove the paper guide.
2.
If the tractor is installed in the pull-tractor position, remove it
and re-install it in the push-tractor position.
3.
Make sure the paper-release lever is in the single-sheet position.
2-24
Using the Printer