Epson C11C294131BZ User Manual - Page 85
Serial interface specifications, Serial pin assignments
View all Epson C11C294131BZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Serial interface specifications The serial interface has the following characteristics. Bit rate: 300, 600, 1200, 2400, 4800, 9600, 19200 bps (selectable) Word length: Data format Start bit Parity bit Stop bit 7 or 8-bit (selectable) 1 bit 0 or 1 bit (selectable) 1 bit (transmitting), 1 bit or more (receiving) Synchronization: Asynchronous Handshaking: DTR protocol, XON/XOFF protocol ETX/ACK protocol (selectable) Parity check: Odd, even, or no parity bit (selectable) Connector: EIA standard, 25-pin, D-SUB, female connector Serial pin assignments The following table lists the serial connector pin assignments and describes their respective interface signals. Pin No. 1 2 3 4 5 7 11 20 Signal Direction Protective Ground (FG) Transmitted data (TXD/SD) Out Received data (RXD/RD) In Request to Send (RTS/RS) Out Clear to Send (CTS/CS) In Signal Ground (SG) Reverse Channel Out Data Terminal Ready Out (DTR/ER) Description Printer's chassis ground Printer has transmitted serial data Printer has received serial data Always positive Ignored Return path for data control signals Connected to Pin 20 Positive when the printer is ready to accept data, and negative when the printer is not ready A-8 Appendix