Epson C11C294131BZ User Manual - Page 51
Envelopes
View all Epson C11C294131BZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
t Because labels are especially sensitive to temperature and humidity, use them only under normal operating conditions. Make sure the printing stays entirely within the printable area. (See the Appendix for specifications.) t Don't leave labels loaded in the printer between jobs; they curl around the platen and may jam when you resume printing. t To remove the labels from the printer, tear off the fresh supply at the rear of the printer; then press LF/FF to advance the remaining labels out of the printer. c Caution: Never feed labels backward through the printer; they can easily peel off the backing and jam the printer. If a label does become stuck in the printer, contact your dealer. Envelopes You can feed envelopes individually using the paper guide. t Before loading an envelope, set the paper thickness lever to 2 or 3. See page 2-16. t To load an envelope, follow the steps in "Running the Self Test" on page 1-10. Insert the wide edge of the envelope into the printer first, printable-side down. When you insert the envelope between the paper guides, push it firmly and hold it until it feeds into the printer. t Use envelopes only under normal temperature and humidity conditions. t Make sure the printing stays entirely within the printable area. The print head must not go past the left or right edge of the envelope or other thick paper. (See the Appendix for specifications.) It's a good idea to print a test sample using a normal single sheet of paper before you print on the envelopes. 2-18 Using the Printer