Epson C11C294131BZ User Manual - Page 67
To switch to the black ribbon, remove the color ribbon as shown
View all Epson C11C294131BZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
After you install the color ribbon cartridge, run the self test as shown on page 1-10. If the top or bottom edge of the characters in the self test are a different color from the rest, adjust the ribbon angle. Check the characters printed in red. If the top edge is blue, move the color ribbon adjustment lever forward. If the bottom edge is yellow, move the lever backward. Then print another self test to check your adjustment. Repeat this process until the ribbon is properly adjusted. Note: When you print using the color ribbon, the print speed is reduced. To switch to the black ribbon, remove the color ribbon as shown in the manual that comes with the color upgrade kit; then install the black ribbon as shown on page 1-5. You do not have to remove the motor unit. 2-34 Using the Printer