Epson C11C294131BZ User Manual - Page 39
Getting the results you expect
View all Epson C11C294131BZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Getting the results you expect When you print on single sheets, you may notice that the printer prints the first page of your file correctly, but then prints too low on the next page, or that it prints the last few lines from one page onto the next. This happens because single sheet handling differs slightly from continuous paper handling. It's easy to adjust the printer so that you get the right results. Simply change some of the settings in your software program as described below. 1. When you install a software program, it normally asks you what printer you are using. Make sure you choose the correct printer. See Chapter 1 for instructions. 2. Many programs have an option that you can use to set the maximum lines-per-page. If you are using standard 8 1/2 × 11-inch paper, set the lines-per-page to 61. Note: To find the right lines-per-page setting for paper that is not 8 1/2 × 11, create a test document using your software program. Set your top and bottom margins to 0 and then create a file of numbered lines from 1 to 66. When you print your file, notice the last number printed on the first page. This is your maximum lines-per-page setting. 3. If your program doesn't have a lines-per-page setting, try decreasing the top margin or increasing the bottom margin, or both, until you get the results you want. 4. You can also try adjusting the form length setting. For a standard 8 1/2 × 11-inch page, try setting the form length to 10 inches. 5. Some programs let you indicate whether you are using single sheets or continuous paper. Make sure you choose single sheets. 2-6 Using the Printer