Epson C11C294131BZ User Manual - Page 77
Using the pull tractor with the push tractor, continuous paper does not feed properly
View all Epson C11C294131BZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Using the pull tractor with the push tractor, continuous paper does not feed properly Paper feed is crooked or the paper jams. The pull tractor and push tractor sprockets are not aligned correctly. When using both tractors, be sure that the sprockets on both are positioned evenly. The paper may have too much slack. Adjust the position of the sprockets to take up any slack along the width of the paper. Remove slack lengthwise by rotating the paper-feed knob. The paper may be caught on the edge guides. Make sure that the paper guide is installed over the paper and that the edge guides are positioned correctly. With color upgrade kit installed, printer doesn't operate properly The lights on the control panel do not go on. Did you install the motor in the color upgrade kit? Follow the instructions on page 2-32. The desired color or certain characters are not printed. Your software program may not be properly set up for color printing. Use the program's setup (or install) procedure to check the printer setting and adjust as needed.If your software program is capable of sending control codes, select the color using the ESC r command. (See the "Command Summary" in the Appendix.) The ribbon cartridge may not be installed properly. See Chapter 2. 3-10 Troubleshooting