Fujitsu 6010N Operator's Guide - Page 100
if [Middle] or [Top & Bottom] is selected, enter both #1 upper limit and, 2 lower limit.
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
ATTENTION Multifeed may not be detected for the top and bottom 25mm of a document. 4. In Step 3, if [Middle] or [Top & Bottom] is selected, enter both "#1" (upper limit) and "#2" (lower limit). #1: Even numbers from 0 to 508mm can be entered. Odd numbers will be made even by adding one. #2: Even numbers from 0 to 510mm can be entered. Odd numbers will be made even by adding one. ATTENTION • Specify a value for #2 that is at least 5mm greater than that for #1. • "#2" can have a maximum value of 510mm. If the paper size setting is long page mode but the length of the document is longer than 510mm, multifeed cannot be detected by length. • When [Middle] is selected, if the document is shorter than "#1", multi- feed will not be detected. When [Top & Bottom] is selected, if the document is shorter than "#2", multifeed will not be detected for the bottom part. • If the values specified for "#1" and "#2" exceed the actual paper size, multifeeds will not be detected. 5. Press the [OK] button. ⇒ The document area to be monitored for multifeeds is set. 66