Fujitsu 6010N Operator's Guide - Page 156
Setting the Destination for Alert Notifications
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
4.6.15 Setting the Destination for Alert Notifications Touch Admin Central Panel Tool Admin An e-mail address can be specified to which an alert notification will be sent whenever a scanner alert situation occurs. It is necessary to set a SMTP server before alert notifications can be sent. For more details about how to set an SMTP server, refer to "4.6.11 Setting the e-Mail Server (SMTP Server)" (page 92). When the destination for alert notification is set, alert notification messages will be sent to the registered e-mail address in the following title. Network Scanner (Scanner Name: xxxx) Alert Notification message For more details, refer to "D.1.3 Alert Monitor System Log Messages" (page 405). 1. Select the [Network Settings] tab on the top menu. 2. Select the [Alert Notification] tab on the left side menu. ⇒ The "Alert Notification" screen appears. 3. Enter an e-mail address to which the alert notification will be sent. For details about e-mail address settings values, refer to "B.1 e-Mail Address Setting Values" (page 386). 4. To confirm that the entered e-mail address is valid, press the [Test] button. Check that the test mail successfully arrives at the expected e-mail address. 5. Press the [OK] button. ⇒ The destination for alert notifications is set. 122