Fujitsu 6010N Operator's Guide - Page 391
Checking the NTP server settings by synchronizing the system, 4.5.5 Setting the Date/Time
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 391 highlights
8.3 Network Connection Troubleshooting ■ Checking the NTP server settings by synchronizing the system time On the "NTP Server" screen, press the [Sync Time] button to check if the system time can be synchronized. After pressing the [Sync Time] button, follow each action described below according to the message that is shown. Message Action System time has been successfully synchronized. None System time synchronization failed. Try the following: • Check the NTP server name and address settings for errors. • Check the network path between to the NTP server for prob- lems. • The NTP server may be busy. Wait a short time before trying again to synchronize the system time. If that does not work, the specified server may not be an NTP server, so try a different NTP server. • The specified NTP server cannot provide a trusted date and time. It attempted to acquire the date and time from a higher level NTP server, but failed. Try a different NTP server or have the network administrator investigate. • Check that the time is correct. If the time is incorrect, adjust the date/time, and try again. • Refer to "4.5.5 Setting the Date/Time" (page 55), adjust the date/time, and try again. Troubleshooting 8 Network Scanner fi-6010N Operator's Guide 357