Fujitsu 6010N Operator's Guide - Page 416
A.5 Multifeed Detection Conditions, A.5.1 Detection by Layer, A.5.1
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 416 highlights
A.5 Multifeed Detection Conditions There are three multifeed detection modes: document layer, document length, and both document layer and length. The following conditions must be satisfied in each of these detection modes. The type of document and document conditions can cause the multifeed detection rate to drop. A.5.1 Detection by Layer If [Ultrasonic] is selected in "6.8.17 Multifeed Detection (Layer and Length)" (page 305), mulifeeds are detected by layer. In this case, set sheets of the same thickness in the ADF at any one time. • Document thickness: 0.065 to 0.15mm • Punched holes are not allowed within 35mm (1.4in) of the vertical center line of the docu- ment. • Do not glue on any other paper within 35mm (1.4in) of the vertical centerline of the docu- ment. A.5.2 Detection by Length If [Length] is selected in "6.8.17 Multifeed Detection (Layer and Length)" (page 305), multifeeds are detected by length In this case, set sheets of the same length in the ADF at any one time. • Document length deviation: 1% or less • Punched holes are not allowed within 35mm (1.4in) of the vertical center line of the docu- ment. 382