Fujitsu 6010N Operator's Guide - Page 411
A.2 Paper Requirements, A.2.1 Paper Type, A.2.2 Paper Weight, A.2.3 Precautions, A.2.1, Paper Type
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 411 highlights
A.2 Paper Requirements A.2.1 Paper Type The following paper types are recommended for use with the ADF: • Woodfree paper • Wood containing paper When documents of a paper type other than those listed above are used, test-scan a few sheets first to check if the document can be scanned without problem. A.2.2 Paper Weight The following paper weights can be used with the ADF: • For general scanning • 52 g/m2 to 127 g/m2 (14 lb to 34 lb) • For A8 and Business Card size, 127 g/m2 only • For scanning with a carrier sheet • Up to 127 g/m2 (Up to 34 lb) • Up to 63.5 g/m2 (Up to 17 lb) (when scanning half fold paper) A.2.3 Precautions The following documents may not scan successfully: • Documents of non-uniform thickness (e.g. envelopes and documents with attachments) • Wrinkled or curled documents (See the following HINT) • Folded or torn documents • Documents with appended photographs, notes, etc. • Tracing paper • Coated paper • Carbon paper • Carbonless paper • Photosensitive paper • Perforated or punched documents • Documents that are not square or rectangular • Exceptionally thin documents (less than 52 g/m2) • Photographs Do not attempt to scan the following types of documents: • Paper-clipped or stapled documents • Documents on which the ink is still wet • Documents smaller than A8 Portrait • Documents wider than Letter size (8.5inches = 216mm, A4 is 210mm wide) • Non-paper documents (such as fabric, foil, transparent paper) A Network Scanner fi-6010N Operator's Guide 377