Fujitsu 6010N Operator's Guide - Page 395
Failure to connect to a server by name, Duplex Mode] setting is Auto-Negotia
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 395 highlights
8.3 Network Connection Troubleshooting No. Problem 6 The network link speed/duplex mode for the scanner and server are different, or Auto-Negotiation is not supported by the server. Action For this scanner, the default [Link Speed/ Duplex Mode] setting is "Auto-Negotiation". On the "Network Status" screen, match the scanner and server's network link speed/duplex mode settings. If the problem persists in spite of having set both the scanner and server's network link speed/duplex settings to "Auto-Negotiation", select something other than "Auto-Negotiation" and check again. For more details about the "Network Status" screen, refer to "4.6.17 Checking the Network Operating Status" (page 125). ■ Failure to connect to a server by name If connection to a server using a FQDN is not possible even after the server name has been checked using a ping test, try the following steps: No. Problem Action 1 Same as in "Failure to connect to a server Check if a network connection is possible using its IP address" (page 359). by trying the same solution for "Failure to connect to a server using its IP address" (page 359). Troubleshooting 2 The scanner's DNS server or WINS server Check that the DNS and WINS server set- settings are invalid. tings are correct. 3 The DNS server or WINS server is not Ping the DNS and WINS servers to check functioning normally, or there is an error they are functioning normally. with the DNS or WINS server network If the DNS or WINS server is not func- connection. tioning, request the network administrator to check its status. 8 Network Scanner fi-6010N Operator's Guide 361