Fujitsu 6010N Operator's Guide - Page 91
Setting the Time to Standby Mode, The Standby Mode screen appears.
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
4.5 Using the System Settings Menus 4.5.6 Setting the Time to Standby Mode Touch Panel Admin Central Tool Admin The scanner can be set to automatically log out and then enter a standby state after specified periods of non-use. For any screen after regular user login, if no operations have been performed for the specified "Logout after" period of time, the scanner automatically logs the user out. The scanner will not logout while the following operations are ongoing: HINT • Scanning documents • e-Mailing a scan • Faxing a scan • Printing a scan • Saving a scan If no operations are performed for the specified "Standby after" period of time, the scanner enters standby mode. The touch panel is switched off when the scanner enters standby mode. When the startup button is pressed, the "Login" screen will appear. The screen displayed after a re-startup varies according to the specified wait time for automatic 4 logout in the following way: • If "Never" is specified for automatic logout, the operation screen is displayed. • If a setting other than "Never" is specified for automatic logout, the "Login" screen is dis- played. 1. Select the [System Settings] tab on the top menu. 2. Select the [Standby Mode] tab on the left side menu. ⇒ The "Standby Mode" screen appears. Administrator Operations (Touch Panel and Network Scanner Admin Tool) Network Scanner fi-6010N Operator's Guide 57