Fujitsu MHM2150AT Manual/User Guide - Page 113
ATA/ATAPI-4 supported = 1
View all Fujitsu MHM2150AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Interface Table 5.4 Information to be read by IDENTIFY DEVICE command (5 of 8) Bit 1 = 1 Mode 4 Bit 0 = 1 Mode 3 *9 WORD 80 Bit 15-6: Reserved Bit 5: ATA/ATAPI-5 supported = 1 Bit 4: ATA/ATAPI-4 supported = 1 Bit 3: ATA-3 supported = 1 Bit 2: ATA-2 supported = 1 Bit 1-0: Undefined *10 WORD 82 Bit 15: Undefined Bit 14: '1' = Supports the NOP command. Bit 13: '1' = Supports the READ BUFFER command. Bit 12: '1' = Supports the WRITE BUFFER command. Bit 11: Undefined Bit 10: '1' = Supports the Host Protected Area feature set. Bit 9: '1' = Supports the DEVICE RESET command. Bit 8: '1' = Supports the SERVICE interrupt. Bit 7: '1' = Supports the release interrupt. Bit 6: '1' = Supports the read cache function. Bit 5: '1' = Supports the write cache function. Bit 4: '1' = Supports the PACKET command feature set. Bit 3: '1' = Supports the power management feature set. Bit 2: '1' = Supports the Removable Media feature set. Bit 1: '1' = Supports the Security Mode feature set. Bit 0: '1' = Supports the SMART feature set. *11 WORD 83 Bits 15-7: Undefined Bit 6: '1' = When the power is turned on, spin is started by the SET FEATURES sub-command. 5-36 C141-E104-03EN