Fujitsu MHM2150AT Manual/User Guide - Page 216
Sequential read
View all Fujitsu MHM2150AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
6.5 Read-Ahead Cache 2) Transfers the requested data that already read to the host system with reading the requested data from the disk media. HAP Stores the read-requested data upto this point Read-requested data Empty area DAP 3) After reading the requested data and transferring the requested data to the host system had been completed, the disk drive stops command execution without performing the read-ahead operation. Read-requested data HAP (stopped) (stopped) DAP Empty area 4) Following shows the cache enabled data for next read command. Cache enabled data Empty area Start LBA Last LBA 6.5.3.2 Sequential read When the disk drive receives the read command that targets the sequential address to the previous read command, the disk drive starts the read-ahead operation. a. Sequential command just after non-sequential command When the previously executed read command is an non-sequential command and the last sector address of the previous read command is sequential to the lead sector address of the received read command, the disk drive assumes the received command is a sequential command and performs the read-ahead operation after reading the requested data. C141-E104-03EN 6-17