Fujitsu MHM2150AT Manual/User Guide - Page 210
Power commands, 6.4 Defect Management
View all Fujitsu MHM2150AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
6.4 Defect Management When one of following commands is issued, the command is executed normally and the device is still stayed in the standby mode. • Reset (hardware or software) • STANDBY command • STANDBY IMMEDIATE command • INITIALIZE DEVICE PARAMETERS command • CHECK POWER MODE command (4) Sleep mode The power consumption of the drive is minimal in this mode. The drive enters only the standby mode from the sleep mode. The only method to return from the standby mode is to execute a software or hardware reset. The drive enters the sleep mode under the following condition: • A SLEEP command is issued. Issued commands are invalid (ignored) in this mode. 6.3.2 Power commands The following commands are available as power commands. • IDLE • IDLE IMMEDIATE • STANDBY • STANDBY IMMEDIATE • SLEEP • CHECK POWER MODE 6.4 Defect Management Defective sectors of which the medium defect location is registered in the system space are replaced with spare sectors in the formatting at the factory shipment. All the user space area are formatted at shipment from the factory based on the default parameters listed in Table 6.1. C141-E104-03EN 6-11