Garmin GPSMAP 60CS Owner's Manual - Page 103
Interface Wiring Diagram
UPC - 753759044060
View all Garmin GPSMAP 60CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Interface formats are selected from the Interface Setup on page 56 of this manual. The input/output lines on your GPSmap 60CS are RS-232 compatible, allowing easy interface to a wide range of external devices, including PC's, differential beacon receivers, marine autopilots and /or a second GPS receiver. The NMEA 0183 version 3.01 interface format is supported by the GPSmap 60CS and enables the unit to drive up to three NMEA devices. NMEA 0183 Version 3.01 Approved Sentences: GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC, GPRTE, GPVTG, GPWPL, GPBOD Garmin Proprietary Sentences: PGRME (estimated error), PGRMM (datum string), PGRMZ (altitude), PSLIB (beacon receiver control) DGPS (Differential GPS) corrections are accepted in RTCM SC-104 version 2.0 format through the "Data In" line. Beacon receivers with the correct RTCM format may be used, but may not correctly display status or allow tuning control from the GPS unit. The USB Interface Cable provided with this unit allows you to connect your GPSmap 60CS to a PC-compatible computer's USB port. GPSmap 60CS Appendix Interface Wiring Diagram (-) Ground () () Data In () () Data Out (+) Power Unit Power/Data Port View 93