Hayward HL32950VSP VS Omni Residential Troubleshooting Guide - Page 15
How To: Connect to Wi-Fi
View all Hayward HL32950VSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
How To: Connect to Wi-Fi The following identifies how to connect to a 2.4Ghz Wi-Fi signal. Step 1 Step 2 On the right of the dashboard locate and tap the "config" icon. Step 3 Select the "network" option, on the right side of the screen. Step 4 If no network has been setup prior, select the desired Wi-Fi signals, otherwise skip to Step 6. Enter the network password, followed by the check mark to complete. NOTE: The network password IS CASE SENSITIVE. To confirm connection, go to 15 Config>Network and verify IP addresses appear under the dynamic tab.
Enter the network password, followed by the
check mark to complete.
How To: Connect to Wi-Fi
15
On the right of the dashboard locate and tap
the “
config
” icon.
If no network has been setup prior, select the
desired Wi-Fi signals, otherwise skip to Step 6.
Step 4
Step 2
Step 3
Step 1
The following identifies how to connect to a 2.4Ghz Wi-Fi signal.
Select the “network” option,
on the right side
of the screen.
NOTE: The network password IS CASE SENSITIVE. To confirm connection, go to
Config>Network and verify IP addresses appear under the dynamic tab.