Hayward HL32950VSP VS Omni Residential Troubleshooting Guide - Page 17
How To: Remove DDT
View all Hayward HL32950VSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
How To: Remove DDT The following identifies how to remove the DDT or Device Discovery Table. This may be helpful when attempting to resolve communication issues. Step 1 Step 2 Press the power button. Step 3 Select "service mode". Step 4 Select either "Yes" to continue and enter service mode. Select "remove DDT", then check mark. After system is wiped clean, then power cycle. NOTE: After removing the DDT, ALWAYS power cycle the controller using the 17 power icon; this will ensure a new table is created upon boot up.
How To: Remove DDT
17
Press the power button.
Select “service mode”.
Step 2
Step 1
Select “remove DDT”, then check mark.
After
system is wiped clean, then power cycle.
Select either “Yes” to continue and enter
service mode.
Step 4
Step 3
NOTE: After removing the DDT, ALWAYS power cycle the controller using the
power icon; this will ensure a new table is created upon boot up.
The following identifies how to remove the DDT or Device Discovery Table. This may be
helpful when attempting to resolve communication issues.